Website mapAdd to favouritesShenzhen ZhaoWei Machinery & Electronics Co. Ltd.


Gear Reducer
Manufacturer Since 1997


ZHAOWEI Gearbox solution
Current location: Home » FAQ » The correct ways to assemble a micro planetary reducer

The correct ways to assemble a micro planetary reducer

Categories: FAQRelease time: 2018-09-13 18:11:00
The correct ways to assemble a micro planetary reducer
It is an important link which ensures a micro planetary reducer to operate normally to install correctly,use and maintenance a micro planetary reducer. So you should comply with rules as follow.

First, Verify that the motor and micro planetary gearbox are intact before installation, and strictly check that the dimensions of the parts connected by the motor and reducer match.This refers to the location of the motor boss, input shaft and reducer groove and other dimensions and fit tolerance.Before installation, the motor input shafts, positioning bumper and gear reducer connection of anti-rust oil with gasoline or zinc sodium water wipe clean, its purpose is to ensure the connection tight and operational flexibility, and to prevent unnecessary wear.

Second,Turn down the screws on the outside dust proof hole of the reducer flange, adjust the PCS system clamping ring so that the side hole is aligned with the dust proof hole, and insert the inner hexagonal tightening. Then, take away the motor shaft key.

Third,Connect the motor to the micro planetary gearbox naturally. When connecting, we must ensure that the output shaft of the micro planetary gearbox and the motor input shaft are concentrically consistent, and the outer flanges are parallel. If the concentricity is not consistent, it will cause the shaft to break or gear wear on the reducer.

In addition, do not hit by hammer and so on when the micro planetary gearbox is installed, prevent axial force or radial force too big damage bearing or gear. Be sure to tighten the mounting bolt before tightening the bolt.

In fact, The correct installation between a reducer and a mechanical equipment is similar to the correct installation between a micro planetary reducer and a drive motor. The key is to ensure that the gear reducer output shaft is consistent with the drive shaft concentricity.

Shenzhen ZHAOWEI Machinery & Electronics Co., Ltd was established in April 1997 which is State High-Tech enterprise for gear transmission design and manufacture. It provides the total drive solution for customers from design, tooling fabrication, components manufacturing and assembly.
For more details, you can contact our online sales manager.

Information about





Add: Zhaowei Industry Park, Middle Chaoyang Road, Yanchuan Street, Songgang Town, Bao'an District, Shenzhen, 518105, Guangdong, China